Free quotes

Home / Guides / Materials list

DIY

Snake fence materials list

Everything you need to build a snake-proof fence yourself, and what each piece is for.

Short answer: 1/4-inch galvanized hardware cloth about 36 inches wide, screws with washers to fasten it, ground staples for the buried edge, and a seal for every gate. Count about 10% extra mesh for overlaps.

The shopping list

WhatWhy
1/4-inch galvanized hardware cloth, 36 inches wideThe fence itself. Get rolls long enough to cover your whole line plus about 10% for overlaps and gates.
Black vinyl-coated 1/4-inch hardware cloth (optional)Harder to see on dark view fence, and often easier to get past an HOA.
Self-tapping screws with neoprene washersFor fastening mesh to metal view fence. Zip ties break down in the sun.
Fender washers and wood screwsFor fastening mesh to wood fence posts and rails.
Landscape staples (ground pins)Pin the buried bottom edge so it can't be pushed up.
Gate bottom sweep or rubber sealCloses the gap under a gate while it still swings.
Aviation snips and heavy work glovesHardware cloth edges are sharp.

Links go to Amazon search results. Check the mesh opening says 1/4 inch before you buy.

Before you buy

  • Pace off the fence line you want covered
  • Count your gates and wall drain holes
  • Check HOA rules on mesh color and height. Our HOA letter tool writes the request for you

Full steps: how to build a snake fence yourself. Not sure DIY is right? Hire a pro or do it yourself.

Common questions

What mesh do I need for a snake fence?

Galvanized or vinyl-coated steel hardware cloth with 1/4-inch openings, about 36 inches wide so you can bury the bottom and still have about 30 inches above ground.

How much mesh should I buy?

Measure the fence line you want to cover, then add about 10% for overlaps, corners and gates.

Can I use chicken wire?

No. Chicken wire openings are far too big; young rattlesnakes and coral snakes slip through.